The POPE Professional® GL-112V2 is a two-way Line Array system. The Line Array speaker consist of one 12” Neodymium woofer and one 36 mm exit throat Neodymium compression driver. These are circuited independently, mounted in separate bass reflex enclosure. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced European transducers are providing high power-to-weight ratio.




Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues etc..


The POPE Professional® GL-112V2 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 118dB continuous,126dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal Mid and HF pattern control, Fast integral rigging system with variable splay angles from 0° to 10°, 1°step. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.

The enclosure constructed with 3/4” (18 mm) Finnish birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x Neutrik® NLT4MP 4 pin Speakon® connector. The GL-112V2 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XD Series or XP Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter functions.

Line Array Element

Model GL-112V2
Article No. #10108
Class Two way Line Array Speaker
Power Rating 800 W Continuous*
Frequency Response (± 3dB) 80Hz - 20kHz
Frequency Range (-10dB) 74Hz - 20kHz
Horizontal Coverage Angle (-6dB) 90 deg. nominal (250Hz - 16kHz)
Vertical Coverage Angle (-6dB) Varies with array size and configuration
Flying Kit Heat treated aluminum, front fittings are fixed connection and rear fittings have several angle options for selection from 0° to 10°With 1°adjustable slots
SPL** 118dB Continuous, 126dB peak
Recommended Signal Processing POPE Professional® XD Series or XP Series DSP
Transducer Sections
Low Frequency 1*12" (300 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 100 mm (4")
Voice Coil Material CCAW In/Out
Magnet Material Neodymium Slug
Chassis Type Cast Aluminum
Cone Surround Triple roll treated polycotton
Former Material Glass Fibre
Input Power Rating /
Each Driver
700 Watts Continuous. Pink Noise
1400 Watts Program
2800 Watts Peak
Bandpass Sensitivity 97 dB SPL (1W @ 1m)
Recommended Frequency 80 Hz - 1800 Hz
Bandpass Nominal Impedance
High Frequency 1*3" (75 mm) Compression driver
Voice Coil Diameter 75 mm (3")
Magnet Material Neodymium
Throat Diameter 36 mm (1.4")
Diaphragm Material Titanium
Voice coil material Edgewound flat aluminum
Power Rating 100 Watts Continuous. Pink Noise.
200 Watts Program
400 Watts Peak
Bandpass Sensitivity 109.5 dB SPL (1W @ 1m)
Recommended Frequency 1800Hz – 20kHz
Bandpass Nominal Impedance
Box Construction 18 mm, 11-ply Finnish birch plywood Trapezoidal Wedge frustum 5 degree side angle enclosure, Composite structure
Finish SoundFlex® environment friendly coating
Suspension System Integral hinge bars and quick release pins
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Input Connectors Neutrik® Speakon® NLT4MP (x2) HF: +2-2 / Low: +1-1 (Input & Parallel connection)
Compatible Sub-woofer All models of POPE Professional® Sub-woofers
Packing Foam with wooden crate carton packing or two speakers in one flight case - optional
Dimensions (H x W x D) 367 mm × 670 mm × 503 mm
Weight 37.6 kg (82.8 lbs)