The POPE Professional® TA Series, TA-10 is a two-way Passive Line Array Speaker and it's powered by TA-18BF flyable Sub-woofer. One TA-18BF flyable Sub-woofer can power the two TA-10 Line Arrays. The POPE Professional's innovated rigging hardware can fly 8 cabinets array with 9:1 safety standard. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.
The POPE Professional's TA-18BF flyable sub-woofer have the same outer entire steel and aluminum hanging accessory like TA-10 Line Array and it can be hang together. Also TA-10 Line Array can be stacked on TA-18BF as ground stacking array system.
The POPE Professional TA-18BF flyable sub-woofer utilizes an 18” LF transducer and provides extremely high levels of tight, punchy bass to the lowest octave of human hearing. The TA-10 Line Array utilizes a 10” LF transducer and a 1.4” throat HF compression driver. It's engineered both a companion and applications requiring extremely high output in a relatively small package.
• Small and medium-scale Live Sound Reinforcement events
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• High efficiency and light weight Neodymium Drivers
• HF horn and Phase Aligned LF drivers for exceptional 100° horizontal coverage pattern
• 9:1 safety standard rigging hardware
• 10" LF and 1.4” throat Compression driver
• Powered by 18” Sub-woofer
• Class-D amplification
• Built-in DSP
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
Model | TA-10 & TA-18BF |
Class | Two way Line Array Speaker & Flyable Powered Sub-woofer |
Frequency Response | 24Hz - 20kHz |
Horizontal Coverage Angle | 100° |
Vertical Coverage Angle | 10° |
Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
SPL** | 126dB Continuous, 135dB peak |
Electronics Sections | |
Amplifier | |
Model | L-16V |
Total Power | 10000W Peak, 5000W RMS Continuous |
Amplifier Output (HF) | 5000W Peak, 2500W Continuous |
Amplifier Output (LF) | 5000W Peak, 1250W + 1250W @ 4Ω Continuous |
Cooling | Aluminum heat Sink with Fan |
Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
Power | AC 85-265V @ 50-60Hz |
Processor | |
In/Out | 2 In / 4 Out |
DSP | 40 bit / 96kHz DSP |
Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
Analog Signal | Balanced Input / Output |
Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
Connectors | XLR male / female and Ethernet |
Control | LAN |
Preset | 24 |
For more specifications about DSP | Check the XT-4040 product catalogue |
Transducer Sections | |
High Frequency | 1*1.4" throat POPE Professional® Compression driver |
Voice Coil Diameter | 75 mm (3") |
Magnet Material | Neodymium |
Diaphragm Material | Titanium |
Speakon Wiring | +2, -2 |
Low Frequency | 1*10" (250 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 78.91 mm (3”) |
Magnet Material | Neodymium |
Speakon Wiring | +1, -1 |
Subwoofer | 1*18" (457 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 100 mm (4”) |
Magnet Material | Ferrite |
Enclosure | |
Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal Line Array & 18 mm, 11-ply birch Faced plywood Rectangle Flyable Sub-woofer enclosure |
Finish | SoundFlex® environmental friendly coating |
Suspension System | Integral hinge bars and quick release pins |
Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
Packing | Foam with wooden crate carton box packing |
Model | TA-10 | TA-18BF |
Dimensions (H x W x D) | 325 mm × 550 mm × 352 mm | 660 mm × 550 mm × 742 mm |
Net Weight | 22 kg (50.69 lbs) | 70 kg (154.32 lbs) |
Gross Weight | 29 kg (48.50 lbs) | 81 kg (178.57 lbs) |
The POPE Professional® TA Series, TA-8 is a two-way Passive Line Array Speaker and it's powered by TA-15BF flyable Sub-woofer. One TA-15BF flyable Sub-woofer can power the two TA-8 Line Arrays. The POPE Professional's innovated rigging hardware can fly 8 cabinets array with 9:1 safety standard. The 35 mm pole mount is making the system easy to use for smaller venues and front fill application.
The POPE Professional's TA-15BF flyable sub-woofer have the same outer entire steel and aluminum hanging accessory like TA-8 Line Array and it can be hang together. Also TA-8 Line Array can be stacked on TA-15BF as ground stacking array system.
The POPE Professional TA-15BF flyable sub-woofer utilizes a 15” LF transducer and provides extremely high levels of tight, punchy bass to the lowest octave of human hearing. The TA-8 Line Array utilizes an 8” LF transducer and 2*1” throat HF compression drivers. It's engineered both a companion and applications requiring extremely high output in a relatively small package.
• Small and medium-scale Live Sound Reinforcement events
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• High efficiency and light weight Neodymium Drivers
• HF horn and Phase Aligned LF drivers for exceptional 100° horizontal coverage pattern
• 9:1 safety standard rigging hardware
• 8" LF and 1” throat Compression driver
• Powered by 15” Sub-woofer
• Class-D amplification
• Built-in DSP
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
Model | TA-8 & TA-15BF |
Class | Two way Line Array Speaker & Flyable Powered Sub-woofer |
Frequency Response | 36Hz - 20kHz |
Horizontal Coverage Angle | 100° |
Vertical Coverage Angle | 10° |
Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
SPL** | 120dB Continuous, 131dB peak |
Electronics Sections | |
Amplifier | |
Model | L-16V |
Total Power | 10000W Peak, 5000W RMS Continuous |
Amplifier Output (HF) | 5000W Peak, 2500W Continuous |
Amplifier Output (LF) | 5000W Peak, 1250W + 1250W @ 4Ω Continuous |
Cooling | Aluminum heat Sink with Fan |
Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
Power | AC 85-265V @ 50-60Hz |
Processor | |
In/Out | 2 In / 4 Out |
DSP | 40 bit / 96kHz DSP |
Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
Analog Signal | Balanced Input / Output |
Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
Connectors | XLR male / female and Ethernet |
Control | LAN |
Preset | 24 |
For more specifications about DSP | Check the XT-4040 product catalogue |
Transducer Sections | |
High Frequency | 2*1" throat POPE Professional® Compression driver |
Voice Coil Diameter | 45 mm (1.75") |
Magnet Material | Neodymium |
Diaphragm Material | Titanium |
Speakon Wiring | +2, -2 |
Low Frequency | 1*8" (204 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 66.6 mm (2.6”) |
Magnet Material | Neodymium |
Speakon Wiring | +1, -1 |
Subwoofer | 1*15" (381 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 100 mm (4”) |
Magnet Material | Ferrite |
Enclosure | |
Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal Line Array & 18 mm, 11-ply birch Faced plywood Rectangle Flyable Sub-woofer enclosure |
Finish | SoundFlex® environmental friendly coating |
Suspension System | Integral hinge bars and quick release pins |
Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
Packing | Foam with wooden crate carton box packing |
Model | TA-8 | TA-15BF |
Dimensions (H x W x D) | 280 mm × 515 mm × 314 mm | 570 mm × 515 mm × 637 mm |
Net Weight | 16 kg (35.27 lbs) | 50 kg (110.23 lbs) |
Gross Weight | 21 kg (46.29 lbs) | 61 kg (134.48 lbs) |
The POPE Professional® TT series, TT-12 is a three-way powered Line Array system. The Line Array speaker consist of POPE Professional® single 12” Neodymium woofer that is circuited independently, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5” Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.
The POPE Professional® TT-12 Line Array Speaker utilizes Line Source Former Technology Horn, High power maximum SPL 129dB continuous,135dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step. The enclosure constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity.
The TT-12 systems are designed to be powered by POPE Professional® Class-D amplification. The TT Series Line Array is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.
• Touring sound
• Small and medium-scale Live Sound
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• Delay systems for large scale outdoor sound reinforcement
• Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues and etc..
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
• Neodymium Drivers
• 90° x 10° (H x V) Coverage
• 1:9 safety standard rigging hardware
• 1*12" LF, 4*6.5” & 2*1.4” throat Compression driver
• Class-D amplification
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Built-in DSP
Model | TT-12 |
Class | Three way Powered Line Array Speaker |
Frequency Response | 80Hz - 20kHz |
Horizontal Coverage Angle | 90° |
Vertical Coverage Angle | 10° |
Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
SPL** | 129dB Continuous, 135dB peak |
Electronics Sections | |
Amplifier | |
Model | L-7H |
Total Power | 8200W Peak, 4100W RMS Continuous |
Amplifier Output (HF) | 1600W Peak, 800W RMS Continuous |
Amplifier Output (MF) | 1600W Peak, 800W RMS Continuous |
Amplifier Output (LF) | 5000W Peak, 2500W RMS Continuous |
Cooling | Aluminum heat Sink with Fan |
Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
Power | AC 85-265V @ 50-60Hz |
Processor | |
In/Out | 1 In / 2 Out |
DSP | 40 bit / 96kHz DSP |
Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
Analog Signal | Balanced Input / Output |
Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
Connectors | XLR male / female and Ethernet |
Control | LAN |
Preset | 24 |
For more specifications about DSP | Check the XT-4040 product catalogue |
Transducer Sections | |
High Frequency | 2*1.4" Throat POPE Professional® Compression driver |
Voice Coil Diameter | 75 mm |
Magnet Material | Neodymium |
Diaphragm Material | Titanium |
Mid Frequency | 4*6.5" (165 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 53.24 mm |
Magnet Material | Neodymium |
Low Frequency | 1*12" (305 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 102.01 mm |
Magnet Material | Neodymium |
Enclosure | |
Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
Finish | SoundFlex® environmental friendly coating |
Suspension System | Integral hinge bars and quick release pins |
Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
Packing | Foam with wooden crate carton packing or Two speakers in one flight case - optional |
Dimensions (H x W x D) | 405 mm × 786 mm × 530 mm |
Net Weight | 55 kg (121.25 lbs) |
Gross Weight | 64 kg (141.09 lbs) |
The POPE Professional® TT series, TT-112 is a two-way powered Line Array system. The Line Array speaker consists of POPE Professional® single 12” Neodymium woofer and a 36 mm exit throat Neodymium compression driver. These are circuited independently, mounted in separate bass reflex enclosure. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.
The POPE Professional® TT-112 Line Array Speaker utilizes Line Source Former Technology Horn, High power maximum SPL 118dB continuous,126dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal Mid and HF pattern control, Fast integral rigging system with variable splay angles from 0° to 10°, 1°step.
The enclosure constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity. The TT-112 systems are designed to be powered by POPE Professional® Class-D amplification. The TT Series Line Array is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.
• Touring sound
• Small and medium-scale Live Sound
• Arenas, live theaters, concert venues, corporate AV, Places of worship
• Delay systems for large scale outdoor sound reinforcement
• Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues and etc..
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
• Neodymium Drivers
• 90° x 10° (H x V) Coverage
• 1:9 safety standard rigging hardware
• 1*12" LF and 1.4” throat Compression driver configuration
• Class-D amplification
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Built-in DSP
Model | TT-112 |
Class | Two way Powered Line Array Speaker |
Frequency Response | 80Hz - 20kHz |
Horizontal Coverage Angle | 90° |
Vertical Coverage Angle | 10° |
Flying Kit | Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots |
SPL** | 118dB Continuous, 126dB peak |
Electronics Sections | |
Amplifier | |
Model | L-12H |
Total Power | 6600W Peak, 3300W RMS Continuous |
Amplifier Output (HF) | 1600W Peak, 800W RMS Continuous |
Amplifier Output (LF) | 5000W Peak, 2500W RMS Continuous |
Cooling | Aluminum heat Sink with Fan |
Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
Power | AC 85-265V @ 50-60Hz |
Processor | |
In/Out | 1 In / 2 Out |
DSP | 40 bit / 96kHz DSP |
Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
Analog Signal | Balanced Input / Output |
Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
Connectors | XLR male / female and Ethernet |
Control | LAN |
Preset | 24 |
For more specifications about DSP | Check the XT-4040 product catalogue |
Transducer Sections | |
High Frequency | 1*1.4" Throat POPE Professional® Compression driver |
Voice Coil Diameter | 75 mm |
Magnet Material | Neodymium |
Throat Diameter | 35.56 mm |
Diaphragm Material | Titanium |
Low Frequency | 1*12" (305 mm) Diameter POPE Professional® Transducer |
Voice Coil Diameter | 102.01 mm |
Magnet Material | Neodymium |
Enclosure | |
Box Construction | 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure |
Finish | SoundFlex® environmental friendly coating |
Suspension System | Integral hinge bars and quick release pins |
Grille | Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing |
Packing | Foam with wooden crate carton packing or Two speakers in one flight case - optional |
Dimensions (H x W x D) | 405 mm × 786 mm × 530 mm |
Net Weight | 38 kg (83.77 lbs) |
Gross Weight | 47 kg (103.61 lbs) |
POPE Professional Acoustics Ltd provides manufacturing, design and installation services to a wide range of POPE Professional sound equipment for Places for Worship, Auditorium, Seminar hall, Conference Hall, Discotheques and Live Sound. In the sound industry, POPE Professional is one of the leading brands in India. Our widest range of products provides to the different needs and taste of a myriad of Customer requirement for any application in the field of professional sound.