PA Amplifiers - T Series
1. Power Indicator | 6. Aux volume |
2.Power Switch | 7. No. 1. Mic jack |
3. BASS control | 8. Electronic Tubes |
4. Treble control | 9. Over-heat indicator |
5.MIC Volume | 10. Unusual indicator |
1.Mute control | 6. Output connector |
2. Line1, Line 2 balance input interface | 7. Fanner |
3. Emergency input | 8. ~220V ± 50Hz power input |
4. Aux input 1.2 jack | 9. Protective tube |
5. Link output | 10. Mic2, Mic 3 balance input |
11. 48 V Phantom switch |
Features
- With 5 input channels, independent volume adjustment is available for each channel, unified volume control.
- The first microphone features highest priority with compulsive inserts function.
- Rated voltage and rated resistance output: 100v/70V, 4-16ohm.
- Two emergency input with secondary priority with compulsive insert function.
- Mic 2 and 3 have the function of accessing wire signal assistance
- Protection and alarm in case of abnormal work.
Style | T-60 B | T-120B | T-240B | T-350B |
Rated Power | 60W | 120W | 240W | 350W |
Speak out | 4-8ohm balance input, 100V/70V rated resistance output. | |||
Aux Output | 600 ohm 1V | |||
Input impedance | MIC2 3; 600ohm 15mv XLR balance input, line 1.2 150mv balance input Aux 1.2: 15Kohm 150mv unbalance | |||
Phantom | 48V | |||
Frequency response | 100Hz-18KHz | |||
THD | Less than 1% at 1KHz, 1/3 rated power | |||
Signal to noise | Microphone 1, 2 and 3:66 dB AUX and 2:80 dB | |||
Tone control | Bass: ± 10dB at 100Hz treble ; ±10 dB at 15KHz | |||
Protection | DC output, overload overheat, shortcut | |||
Mute Control | MIC 1 input cover other input | |||
Power require | ~220V/50Hz | |||
Power consume | 100W | 200W | 320W | 480W |
Dimension | ||||
Gross weight | 8.92 kg | 10.14 kg | 10.8 kg | 14.4 kg |
Net weight | 7.72 kg | 9.94 kg | 9.8 kg | 13.4 kg |