Description
The POPE Professional® MAC Series of Amplifiers are specially designed for touring and installation. It’s unique design and powerful output can meet the requirement of any sound reinforcement project.
Features
- CLASS H circuit to improve the power amplifier’s efficiency, stability & decrease the temperature in operation.
- Perfect protection,e.g. short-circuit protection, overtemperature protection and DC protection.
- The fan with variable speed for cooling.
- Built-in compression function to prevent the power amplifier from distortion of over input.
Application
The MAC Series Amplifiers can use stadium, dance hall, concerts and touring live performances.
Power Output
| Model |
MAC-2202 |
MAC-3202 |
MAC-5202 |
MAC-7202 |
MAC-8202 |
2-ohm Dual (per ch.)
|
750W |
950W |
1,300W |
1,900W |
2,400W |
| 20 Hz - 20 kHz |
| 1 kHz |
1,000W |
1150W |
1,600W |
2,400W |
3,000W |
| 4-ohm Dual (per ch) |
460W |
650W |
950W |
1,300W |
1,600W |
| 8-ohm Dual (per ch) |
300W |
400W |
600W |
800W |
1,000W |
| 4-ohm Bridge Mono |
1,500W |
1,900W |
2,800W |
3,800W |
4,800W |
| 8-ohm Bridge Mono |
920W |
1,300W |
1,900W |
2,600W |
3,200W |
Guaranteed minimum power in watts at 20 Hz-20 kHz with 0.35% THD
Specifications
| Frequency Response |
±0.1 dB from 20 Hz to 20 kHz at 1 watt |
| Phase Response |
±10 degrees from 10 Hz to 20 kHz at 1 watt |
| THD |
0.05% |
Intermodulation Distortion
(IMD) |
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB) |
| Signal-to-Noise Ratio |
>105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz. |
| CMRR (20 Hz to 1 kHz) |
> 55 dB, typically > 70 dB |
Crosstalk (below rated
power, 20 Hz to 1 kHz) |
> 80 dB |
| Slew Rate |
80V/usec |
| Damping Factor |
>1,000 from 10 Hz to 400 Hz |
| Input Impedance (Nominal) |
20K**Balanced |
| Signal Input |
Two balanced 3-pin female XLR connectors |
| Signal Output |
Parallel two balanced 3-pin male XLR connectors |
| Input Sensitivity gain |
0.775 / 1 / 1.44 Volt |
| Output Circuitry |
Class H |
| Output Connector |
Two sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector |
| Connectors |
Neutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector |
| LED Indicator |
Power, Signal, Protect, Clip |
| Protection |
Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients |
| Cooling System |
Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow |
| Construction |
Steel chassis with durable black powder coat finish |
| Power Supply |
Toroidal Transformer |
| Power Range |
200 - 240VAC @ 50Hz |
| Model |
MAC-2202 |
MAC-3202 |
MA-5202 |
MAC-7202 |
MAC-9200 |
| Dimension (W x D x H) |
482mm × 443.5mm × 88.8mm |
482mm × 468mm×132mm |
| Size |
2U |
3U |
| Weight (Kg) |
22.5 |
23.5 |
26 |
27 |
33 |
|
