Line Array Speaker System OP- 4925L
The POPE Professional OP 4925L is a three-way Line Array system. The Line Array speaker consist of two 12” loudspeakers that are circuited independently and mounted in separate bass reflex enclosures and four high efficiency high power handling 6.5” loudspeakers mounted in a V-shaped configuration combined with two 36 mm exit compression drivers coupled to individual Waveguides that are vertically aligned. The Line Soure Former produces a wave front similar to that of a ribbon driver. Advanced components are providing high power-to-weight ratio.
Application
- Live sound open-air venues, arenas, concerts
- Fixed installations multi-purpose auditoria, sports venues etc..
Description
The enclosure constructed with 3/4” (18 mm) finnish birch plywood, scrwed and glued together for maximum strength and rigidity. A rear panel connector plate carries 2 x Neutrik 8 pin connector. The OP 4925L systems are designed to be powered by POPE Professional power amplifiers. A POPE Professional DSP 3060 or DSP 4080 digital loudspeaker controller (Speaker Management System) is available to provide Crossover, delay, Equalizer and limiter facilities.
Specifications
Line Array Element | |
Model | OP-4925L |
Frequency Response (3dB) | 60Hz-20kHz |
Frequency Range (-10dB) | 48Hz-20kHz |
Horizontal Coverage Angle (-6dB) | 90 deg. norminal (250Hz - 16kHz) |
Vertical Coverage Angle (-6dB) | Varies with array size and configuration |
Maximum Peak Output | 140 dB |
Recommended Signal Processing | POPE Professional DSP 3060 or DSP 4080 |
Transducer Sections | |
Low Frequency | 2 x 12" Dia POPE professional Low Mid Speaker with 75 mm Voice coil |
Bandpass Nominal Impedance | 8 ohms each driver (each LF woofer individually wired) |
Input Power Rating | 900W (1800W peak) 2 hours |
Bandpass Sensitivity | 99 dB,1W/1m (3.3 ft) |
Mid Frequency | 4 x 6.5" Dia POPE Professional High Mid Speaker with 45 mm Voice Coil |
Bandpass Norminal Impedance | 8 ohm (drivers wired series parallel) |
Input Power Rating | 480W (1920W peak) 2 hours |
Bandpass Sensitivity | 98 dB, 1W/1m (3.3 ft) |
High Frequency | 2 x 75mm(3 in.) Titanium diaphragm, 36mm(1.4 in.) throat diameter Neodymium drivers |
Bandpass Norminal Impedance | 16 ohm (drivers wired in series) |
Input Power Rating | 80W (320W peak) |
Bandpass Sensitivity | 110 dB, 1W/1m (3.3 ft) |
Enclosure | |
Box Construction | Wedge frustum 5 degree side angle enclosure, Composite structure, 2 handles |
Finish | Matt textured environmental friendly paint |
Suspension System | Integral hinge bars nest in rigging tubeosn box ends. Quick release pins with restraining lanyards |
Grille | Perforated Aluminum |
Input Connectors | 2 x Neutrik NL8 |
Dimensions (Hx Wx D) | 367mm x 1061mm x 508mm |
Weight | 75kg (165.3 lb) |