Power Amplifiers - PM Series
Application
The PM Series amplifiers give you clean, dynamic power with the legendary sound quality and reliability that pros depend on. The PM Series deliver unmatched performance at a new breakthrough price.
Features
- High damping factor provides superior control over low frequency drivers for a clean, accurate low end.
- Safe with any load. Bridge-Mono and Parallel-Mono modes offer optimal load matching performance.
- Complete protection against shorted output, mismatched loads, overheating, DC input/output and high frequency overload, full internal fault protection.
- Balanced XLR inputs with balanced direct XLR output. Optional barrier block input connectors are available with the PM-BB accessories.
- Efficient heat sinks and self-contained forced air cooling system, dissipate heat quickly and evenly for extra amplifier protection and greater power output.
Specification
| Model | PM 600 | PM 900 | PM 1600 | PM 2000 | |
| Stereo Power 1 KHz 0.1% THD | 8Ω | 300W | 400W | 550W | 650W |
4Ω | 450W | 600W | 800W | 1050W | |
| Bridge mono power 1 KHz 0.1% THD | 8Ω | 900W | 1200W | 1600W | 2100W |
| Parallel mono power 1KHz 0.1% THD | 8Ω | 300W | 400W | 550W | 650W |
4Ω | 450W | 600W | 800W | 1050W | |
| Full bandwidth | 20Hz-20KHz+/-0.5dB | ||||
| Frequency Response | +0dB/-0.3dB from 20Hz to 20kHz at 1 watt | ||||
| Phase response | +/-0.1 degrees from 10Hz to 20kHz at 1 watt | ||||
| S/N | >98dB | ||||
| IMD | ≤ 0.01% Rated Power @ 8Ω | ||||
| THD | ≤ 0.01% Rated Power @ 8Ω 1kHz | ||||
| Damping Factor | > 500@ 1kHz/8ohms | ||||
| Cross Talk | > 50 dB | ||||
| Slew Rate | 80v/ μS (Stereo) | ||||
| Input impedance | 10K/20K hours, unbalanced or balanced | ||||
| Dimensions (mm) | 483 x 400 x 89 mm | ||||
| Main power supply | ~240V 50/60Hz Fuse:T8A | ~240V 50/60Hz Fuse:T12A | ~240V 50/60Hz Fuse:T12A | ~240V 50/60Hz Fuse:T15A | |
| N.W | 19 kg | 21.5kg | 24.5kg | 26.5kg | |
| W.G. | 21kg | 23kg | 26.5kg | 28kg | |