Description
The POPE Professional® TT Series TT-218BV1 dual 18" horn loaded powered sub-woofer with its high sensitivity POPE Professional® transducer, is designed ground up to provide sub frequency extension to modern sound reinforcement applications. The TT Series Sub-woofers are having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.
Applications
• Class-D amplification
• SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Built-in DSP
Features
• 2*18" (460 mm) Diameter 4” (101.93 mm) POPE Professional® Transducer
• FIR/IIR Filters
• Dante® / AES / Analog Input
• 40 bit floating point / 96kHz DSP Processing
• Neodymium Drivers
• 90° x 10° (H x V) Coverage
• 1:9 safety standard rigging hardware
• 2*12" LF, 4*6.5” & 2*1.4” throat Compression driver
• Class-D amplification
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Built-in DSP
Specifications
| Model | TT-218BV1 |
| Class | 2*18" Powered Horn-Loaded Sub-woofer |
| Frequency Response | 20Hz - 160Hz |
| SPL** | 129dB Continuous, 138dB peak |
| Electronics Sections | |
| Amplifier | |
| Model | L-16V |
| Total Power | 10000W Peak, 5000W RMS Continuous |
| Cooling | Aluminum heat Sink with two Fans |
| Power Connector | Seetronic® SAC3MPB-N-W (In) / SAC3MPA-N-W (Out) with Rubber sealing cover |
| Power | AC 85-265V @ 50-60Hz |
| Processor | |
| In/Out | 1 In / 1 Out |
| DSP | 40 bit / 96kHz DSP |
| Filters | FIR / IIR, Frequency, Gain, RMS Limiter |
| Analog Signal | Balanced Input / Output |
| Digital Signal | Dante® / AES (DE-44 Dante® Module - Optional) |
| Connectors | XLR male / female and Ethernet |
| Control | LAN |
| Preset | 24 |
| Transducer Sections | |
| Low Frequency | 2*18" (460 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 101.93 mm (4”) |
| Magnet Material | Ferrite |
| Enclosure | |
| Box Construction | 18 mm, 11-ply birch Faced plywood Rectangle Sub-woofer enclosure |
| Grille | Powder coated, black, 16-gauge perforated steel grille |
| Surface Finish | SoundFlex® environment friendly coating |
| Packing | Foam with wooden crate carton packing or Flight case - optional |
| Dimensions (H x W x D) | 560 mm x 1240 mm x 850 mm |
| Net Weight | 118 kg (260.14 lbs) |
| Gross Weight | 136 kg (299.82 lbs) |