Description
The POPE Professional® MAC Series of Amplifiers are specially designed for touring and installation. It's unique design and powerful output can meet the requirement of any sound reinforcement project.
Features
- CLASS H circuit to improve the power amplifier's efficiency, stability & decrease the temperature in operation.
- Perfect protection,e.g. short-circuit protection, overtemperature protection and DC protection.
- The fan with variable speed for cooling.
- Built-in compression function to prevent the power amplifier from distortion of over input.
Application
The MAC Series Amplifiers can use stadium, dance hall, concerts and touring live performances.
Power Output
Ratings (RMS @ 1% THD @ 230VAC
| Model | MAC-2202 | MAC-3202 | MAC-5202 | MAC-7202 |
MAC-8202
|
| 8-ohm Dual (per ch) | 300W | 400W | 600W | 800W | 1,200W |
| 4-ohm Dual (per ch) | 460W | 650W | 950W | 1,300W | 1,800W |
Specification
| Frequency Response | ±0.1 dB from 20 Hz to 20 kHz at 1 watt | |||||
| Phase Response | ±10 degrees from 10 Hz to 20 kHz at 1 watt | |||||
| THD | 0.05% | |||||
| Intermodulation Distortion (IMD) |
<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB) | |||||
| Signal-to-Noise Ratio | >105 dB A-weighted or 100 dB unweighted below rated power, 20 Hz - 20 kHz. | |||||
| CMRR (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB | |||||
| Crosstalk (below rated power, 20 Hz to 1 kHz) |
> 80 dB | |||||
| Slew Rate | 80V/usec | |||||
| Damping Factor | >1,000 from 10 Hz to 400 Hz | |||||
| Input Impedance (Nominal) | 20KΩ Balanced | |||||
| Signal Input | Two balanced 3-pin female XLR connectors | |||||
| Signal Output | Parallel two balanced 3-pin male XLR connectors | |||||
| Input Sensitivity gain | 0.775 / 1 / 1.44 Volt | |||||
| Output Circuitry | Class H | |||||
| Output Connector | Two sets of Red & Black color coded binding posts & two Neutrik® Speakon® 4 pole chassis connector | |||||
| Connectors | Neutrik® 3-pin XLR, Neutrik® Speakon® 4 pole chassis connector | |||||
| LED Indicator | Power, Signal, Protect, Clip | |||||
| Protection | Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. Also protect loudspeakers from input/output DC and turn-on/turn-off transients | |||||
| Cooling System | Internal heat sinks fitted with four variable speed fans for uniform heat dissipation from rear to front air flow | |||||
| Construction | Steel chassis with durable black powder coat finish | |||||
| Power Supply | Toroidal Transformer | |||||
| Power Range | 200 - 240V AC @ 50Hz | |||||
| Model |
MAC-2202
|
MAC-3202
|
MA-5202
|
MAC-7202
|
MAC-9200
|
|
| Input Watts (Power Consumption) |
420W
|
660W
|
880W
|
1110W
|
1320W
|
|
| Dimension (W x D x H) |
482mm × 443.5mm × 88.8mm
|
482mm × 468mm×132mm
|
||||
| Size |
2U
|
3U
|
||||
| Weight (Kg) |
22.5
|
23.5
|
26
|
27
|
33
|
|