XT-4040

Description

The POPE Professional® XT-4040 is our most complete fixed architecture digital processor with a focus on audio performance, FIR filters, and digital I/O flexibility. Our state of the art processor provides 96 kHz sampling, 40 bit floating point Analog Devices Sharc DSP engine, high performance 24 bit converters, precise algorithms, IIR crossover filters, and Dante®, AES In / Out. The result is best in class audio performance and feature set.

The POPE Professional® XT-4040 can be configured stand alone or remote controlled via with the supplied POPE Professional® SoundNet® Networking software application GUI. This Graphic User Interface is not only gives a clear overview off all settings, but at the same time provides you with real time hands on control over all your system parameters. For both fixed and touring applications, the XT-4040 offers you reliable top high end quality sound.

The XT-4040 DSP is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.

 

Features

• Dante® /AES Digital In / Out
• Analog 4 in 4 out configuration
• FIR/IIR Filter per Input & Output
• Supplied with SoundNet® Networking software
• Ethernet Connectivity
• 24 bit AD/DA converters
• Sampling rate 96 kHz - 40 bit floating point DSP
• 500ms Delay per Input and Output
• X-Over, DynEQ, RMS / PEAK Limiters
• Phase correction and 24 Presets
• Password protection
• Up to 255 devices in one network
• 1U Rack design

Applications

• Live Sound
• Touring Concerts
• Club Systems
• Places of Worship
• Large Nightclubs
• Cinema Theaters

Specifications

Model XT-4040
Class 4 In / 4 Out Digital Signal Processor
Front Panel Controls  
Display 2x16 Characters Backlit LCD
Level meters 5 Segment LEDs
Buttons 5 System Menu Controls, 4 Mute/Channel Controls, 1 Dial Encoder
   
Connectors  
Analog 3-pin XLR (four female for input & four male for output)
Digital I/O (Dante®/AES) 2 x RJ-45 Female
DE-44 Dante® Module Male 2 x 25 pin dual header connector, Plastic quick connector
Power Standard IEC Socket
Inputs and Outputs  
Input Impedance >10k Ohms
Output Impedance 50 Ohms
Maximum Level +20dBu
Type Electronically balanced
Audio Performance  
Frequency Response +/- 0.1dB (20 to 30kHz)
Dynamic Range 115 dB typ (unweighted)
CMMR >100dB (50 to 10kHz)
Crosstalk < -100dB
Distortion 0.002% (1kHz @ +4dBu)
Digital Audio Performance  
Processor (DSP) 40-Bit Floating Point
Sampling Rate 96kHz
Analog Converters Super Performance 24-bit
Propogation Delay 1.5ms (1.75-7.75 with FIR)
Audio Control Parameters  
Gain -120 to +15dB in 0.1 dB steps
Polarity + / -
Delay Up to 500 ms per In/Out
In - Gain/IIR  
Variable Equalizers 5 per In
Mode OFF, EQ, HP, LP, H-SH, L-SH, H-SHQ, L-SHQ, ALLP1, ALLP2
Gain -15 to +15dB in 0.1dB steps
Frequency 20 to 20kHz
In - FIR Bypass / Load FIR
Out - Gain/IIR  
Variable Equalizer 10 per Out
Mode OFF, EQ, HP, LP, H-SH, L-SH, H-SHQ, L-SHQ, ALLP1, ALLP2
Gain -15 to +15dB in 0.1dB steps
Frequency 20 to 20kHz
Quality 0.5-100
Out – DynEQ  
Filter:  
Variable Equalizer 2 per Out
Mode OFF, EQ, HP, LP, H-SH, L-SH, H-SHQ, L-SHQ, ALLP1, ALLP2
Gain -15 to +15dB in 0.1dB steps
Frequency 20 to 20kHz
Quality 0.5-100
System Parameters  
No. Of Programs 30
Delay Units Millisecond, Feet, Meter
Frequency Mode 36 steps/Oct, 1Hz Resolution
Security locks Password
Channel names 6 Characters
General  
Power 90-265 VAC (50/60Hz) – 20VA
Dimensions (H x W x D) 44mm x 483mm x 229 mm
Weight 4.6 Kg (10.13 lbs)